Hello Guys,
I am having issues with wifi on the UC500 after I changes my switch SF300. my current config is as below.
ot11Radio0/5/0
no ip address
!
encryption vlan 1 mode ciphers aes-ccm
!
ssid AGRI
!
ssid cisco-voice
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2437
station-role root
antenna receive left
antenna transmit left
world-mode dot11d country AE both
service-policy output Voice
!
interface Dot11Radio0/5/0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
!
interface Dot11Radio0/5/0.100
encapsulation dot1Q 100
bridge-group 100
bridge-group 100 subscriber-loop-control
bridge-group 100 spanning-disabled
bridge-group 100 block-unknown-source
no bridge-group 100 source-learning
no bridge-group 100 unicast-flooding
Any idea?
Thanks.
