02-11-2010 03:42 PM - edited 03-21-2019 02:09 AM
We have a six phone blast hunt group. When a call is in progress and a second call comes in, the call is displayed on the hunt group phones, but the phones do not ring. The phones are SPA504G.
Any ideas on how to get the phone that have not picked up the first call to ring for subsequent calls?
Thanks,
02-11-2010 03:47 PM
Can you provide the config and IOS version you are running, as well as the firmware from the phones.
02-19-2010 12:53 PM
Hi Steven,
Sorry for the delay in responding to this post. We were trying to come up with a design workaround that would avoid this problem.
The current phone load is 7.1.3c. I would prefer not to post the config on a public forum. Would it be possible for you to e-mail me and then I can send you the config?
02-19-2010 01:25 PM
I could not reproduce this with a SPA504G with calls into its blast group. They all ring, even if someone answers the first call.
I am running 7-4-2.bin, which is in 8-0-0 bundle zip, so you phone load is older. Just a thought.
Steve D
02-19-2010 01:37 PM
Steven,
The system is a UC540. The only software build I see that is the 7.1(3) release. Has the 8.0 build been released for download?
02-19-2010 01:45 PM
You can get the 8.0 release from here...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide