Hello,
I would like to add a wireless guest to a UC 540
A couple of questions, how can I point DHCP to guest ?
I need a route to the public gateway ?
Need assistance with an ACL
Thanks for any help
Thuis is what I am planning to add:
dot11 ssid guest
vlan 99
authentication open
authentication key-management wpa
wpa-psk ascii 0 porkguest
interface Dot11Radio0/5/0.99
encapsulation dot1Q 1 native
bridge-group 99
bridge-group 99 subscriber-loop-control
bridge-group 99 spanning-disabled
bridge-group 99 block-unknown-source
no bridge-group 99 source-learning
no bridge-group 99 unicast-flooding
interface Dot11Radio0/5/0
no ip address
!
encryption vlan 99 mode ciphers aes-ccm
ssid guest
interface Vlan99
ip address
bridge-group 99
ip route 192.168.99.0 new gateway
ip dhcp excluded-address 192.168.99.1 192.168.99.3
!
ip dhcp pool guest
network 192.168.99.0 255.255.255.0
dns-server 8.8.8.8 4.2.2.2
no domain-name