IOS - Selective ISAKMP keepalive per tunnel

[train_wreck]

I see that "crypto isakmp keepalive" settings appear to be globally applied to all IKEv1 tunnels. In my case, I would like to disable them for the L2L tunnels but enable it for dynamic-map RA tunnels. Is this possible on IOS? (version 15.7(3)M)

[Rob Ingram · Accepted solution]

Hi,
You can configure the keepalive under the isakmp profile(s) rather than configure globally. Link here
HTH

[Mohammed al Baqari]

You can use crypto isakmp profile to change the timer per profile. Then
attached each profile to the respective crypto-map entry