1231G-A-K9 Adapter

[cagilliam]

I have a Belkin DB09M to RJ-45 Adapter. I need to know the pin configuration in order to make this work.

[scottmac]

For a console cable?

Pins 3&6 are Tx & Rx, pins 4&5 are common. The rest are No Connection.

Also, make sure the cable is pinned-out as a "rolled" cable (pin 1 on end A goes to pin 8 on the other end, 2 to 7, 3 to 6, etc ...)

Here's a link:

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a00801f5d85.shtml

Good Luck

Scott

[cagilliam]

Yes. This is a console cable, so that I may communicate with my computer to program the access point.