10-28-2005 01:14 AM
I try to configure callback with 1721 and Radius ACS3.3.
The configuration is the following:
Building configuration...
Current configuration : 2413 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname RASCDT
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$lAIe$6eZmk3f/EAX17iNLhbquO/
!
aaa new-model
!
!
aaa authentication login default group radius local
aaa authentication ppp default if-needed group radius
aaa authorization network default group radius
aaa accounting exec default start-stop group radius
aaa accounting network default start-stop group radius
!
aaa session-id common
!
resource policy
!
ip subnet-zero
!
!
no ip dhcp use vrf connected
!
!
ip cef
no ip domain lookup
ip domain name cam
async-bootp dns-server xxxxxxxxxxxx
async-bootp nbns-server xxxxxxxxxxxxx
!
chat-script CALLBACK ABORT ERROR ABORT BUSY "" "AT" OK "ATDT \T" TIMEOUT 30 CONN
ECT \c
chat-script offhook "" "ATH1" OK \c
username administrator password 7 xxxxxxxxxxxxxxx
!
!
!
interface FastEthernet0
ip address 192.168.XXX.XX 255.255.255.0
speed auto
!
interface Async1
ip unnumbered FastEthernet0
encapsulation ppp
ip tcp header-compression
dialer in-band
async mode interactive
peer default ip address pool default
ppp callback accept
ppp authentication chap
!
interface Async2
ip unnumbered FastEthernet0
encapsulation ppp
ip tcp header-compression
dialer in-band
async mode interactive
peer default ip address pool default
ppp authentication chap
!
interface Async3
ip unnumbered FastEthernet0
encapsulation ppp
ip tcp header-compression
dialer in-band
async mode interactive
peer default ip address pool default
ppp callback accept
ppp authentication chap
!
interface Async4
ip unnumbered FastEthernet0
encapsulation ppp
ip tcp header-compression
dialer in-band
async mode interactive
peer default ip address pool default
ppp authentication chap
!
ip local pool default yyyyyyyyyyyy yyyyyyyyyyyy
ip classless
ip route 0.0.0.0 0.0.0.0 xxxxxxxxx
no ip http server
!
!
dialer-list 1 protocol ip permit
radius-server host xxxxxxxxxx auth-port 1645 acct-port 1646
radius-server timeout 30
radius-server key 7 03165A18070C321D1C
!
control-plane
!
!
line con 0
line 1 4
script modem-off-hook offhook
script callback CALLBACK
modem InOut
transport input all
autoselect ppp
stopbits 1
speed 115200
flowcontrol hardware
line aux 0
line vty 0 4
!
end
When i try to callback the client receive popup for callback number but callback don't start.
On ACS3.3 i set attibute 006 (framed) and 007 (ppp) .
have you any suggestions ??
thanks
10-28-2005 03:56 AM
Hello,
try to configure line 1 4 as following:
script connection offhook
script dialer callback
Also, add 'ppp callback accept' to the configuration of Async2 and Async 4.
Can you post the output of 'debug modem' when your client dials in ?
Regards,
GP
11-02-2005 12:29 AM
I change configuartion with script connection offhook
and script dialer callback but i have the problem it's the same.The debug output is:
RASCDT#deb modem
Modem control/process activation debugging is on
RASCDT#
RASCDT#
RASCDT#
RASCDT#
RASCDT#
*Mar 9 19:38:00.237: Modem (0/2) DCD Asserted
*Mar 9 19:38:00.525: TTY3: DSR came up
*Mar 9 19:38:00.525: Modem 0/2 WIC-AM: in modem state 'Connect'
dte = modulation= Unkn protocol = compression_type = NONE tx_speed = rx_spee
d =
*Mar 9 19:38:01.525: tty3: Modem: IDLE->(unknown)
*Mar 9 19:38:01.533: TTY3: Autoselect started
*Mar 9 19:38:01.533: TTY3: create timer type 0, 120 seconds
*Mar 9 19:38:02.389: TTY3: Autoselect sample 7E
*Mar 9 19:38:02.393: TTY3: Autoselect sample 7EFF
*Mar 9 19:38:02.393: TTY3: Autoselect sample 7EFF7D
*Mar 9 19:38:02.393: TTY3: Autoselect sample 7EFF7D23
*Mar 9 19:38:02.393: TTY3 Autoselect cmd: ppp negotiate
*Mar 9 19:38:02.397: TTY3: destroy timer type 0
*Mar 9 19:38:02.397: TTY3: EXEC creation
*Mar 9 19:38:02.401: TTY3: create timer type 1, 600 seconds
*Mar 9 19:38:02.405: TTY3: destroy timer type 1
*Mar 9 19:38:02.405: TTY3: no timer type 0 to destroy
*Mar 9 19:38:02.405: TTY3: no timer type 2 to destroy
*Mar 9 19:38:02.409: Modem 0/2 WIC-AM: switching to PPP mode
*Mar 9 19:38:02.417: Modem 0/2: PPP escape map: Tx map = FFFFFFFF, Rx map = 0
*Mar 9 19:38:02.421: %LINK-3-UPDOWN: Interface Async3, changed state to up
*Mar 9 19:38:02.556: Modem 0/2: PPP escape map: Tx map = 0, Rx map = 0
*Mar 9 19:38:04.948: Modem (0/2) DCD UnAsserted
*Mar 9 19:38:05.556: TTY3: DSR was dropped
*Mar 9 19:38:05.556: tty3: Modem: READY->(unknown)
*Mar 9 19:38:06.556: TTY3: dropping DTR, hanging up
*Mar 9 19:38:06.556: TTY3: Async Int reset: Dropping DTR
*Mar 9 19:38:06.556: tty3: Modem: HANGUP->(unknown)
*Mar 9 19:38:06.556: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:07.560: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:07.560: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:08.332: Modem 0/2: PPP escape map: Tx map = FFFFFFFF, Rx map = 0
*Mar 9 19:38:08.556: %LINK-5-CHANGED: Interface Async3, changed state to reset
*Mar 9 19:38:08.564: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:08.564: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:09.568: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:09.568: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:10.572: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:10.572: TTY3: cleanup pending. Delaying DTR
*Mar 9 19:38:11.556: Modem 0/2 WIC-AM: switching to character mode
*Mar 9 19:38:11.560: TTY3: no timer type 0 to destroy
*Mar 9 19:38:11.560: TTY3: no timer type 1 to destroy
*Mar 9 19:38:11.560: TTY3: no timer type 3 to destroy
*Mar 9 19:38:11.560: TTY3: no timer type 4 to destroy
*Mar 9 19:38:11.560: TTY3: no timer type 10 to destroy
*Mar 9 19:38:11.560: TTY3: no timer type 2 to destroy
*Mar 9 19:38:11.560: Async3: allowing modem_process to continue hangup
*Mar 9 19:38:11.576: TTY3: restoring DTR
*Mar 9 19:38:11.596: TTY3: Modem get info started
*Mar 9 19:38:12.104: TTY3: Modem: ATS86? -> 012OK
*Mar 9 19:38:12.704: TTY3: Modem: ATZ -> OK
*Mar 9 19:38:13.220: TTY3: Modem: AT&F\V1S0=1 -> OK
*Mar 9 19:38:13.564: %LINK-3-UPDOWN: Interface Async3, changed state to down
*Mar 9 19:38:23.556: Modem Registers - IMR:0x0 LED:0x0 RstCntrl:0x0 MSR:0xFF
*Mar 9 19:38:23.556: CHAT3: Attempting async line dialer script
*Mar 9 19:38:23.556: Modem Registers - IMR:0x0 LED:0x0 RstCntrl:0x0 MSR:0xFF
*Mar 9 19:38:23.560: CHAT3: process started
*Mar 9 19:38:23.560: CHAT3: Asserting DTR
11-02-2005 10:40 AM
i fix the problem with :
script dialer callback
and script with ATX3 :
chat-script callback ABORT ERROR ABORT BUSY "" "AT" OK "ATX3" OK "ATDT \T" TIMEOUT 30 CONN
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide