2811 with PRI as ISDN Access Server

[thomas.feichter]

Hi guys!

Is it possible to use a 2811 with NM-2CE1T1_PRI as ISDN Dialup Access-Server?

I would use a scalable config, using radius to assign "ip framed address" and "framed-route".

Could I use 1 Dialer interface for all  the connections. I can´t use "dialer rotary-groups" in 12.4(15)T15

Regards,

Thomas

Nachricht geändert durch Thomas Feichter

[lgijssel]

Hi Thomas,

The module is supported on the 2811, according to the two links below:

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/ps5882/product_data_sheet0900aecd8016fa68_ps5854_Products_Data_Sheet.html

http://www.cisco.com/en/US/prod/collateral/modules/ps2641/product_data_sheet0900aecd8050918e_ps5855_Products_Data_Sheet.html

This link provides info on the configuration of the module:
http://www.cisco.com/en/US/docs/ios/interface/configuration/guide/ir_halfport_pri_net_mod.html

regards,

Leo