Hi guys!Is it possible to use a 2811 with NM-2CE1T1_PRI as ISDN Dialup Access-Server?I would use a scalable config, using radius to assign "ip framed address" and "framed-route".Could I use 1 Dialer interface for all  the connections. I can´t use "di...

Hi everyone!Is it possible to do a per-session queuing on the LAC? In addition, the service-policy should be provided by the Radius server.On the Virtual-template it is possible...However I have to manage some different traffic profiles and I can´t u...

Hi to all!It is possible to run MLPPP over Ethernet dot1q subinterfaces?I fact, 2 PPPoE sessions on Multilink.On the customer site I have a 1841 with 2 ADSL WICs. This 2 PVC's are terminated on the 7600 on 2 VLANs..Thanks and regards,Thomas

Hi,I have a question about the mtu size with mpls.How I set the mtu to support ATOM, VPLS, L3VPN?I found some documents, but for me it is not totally clear.It seems that the 12000 Routers sets automatically the mtu to 1538. The 7606, 7201 and 3750 no...

Hi,I have to deploy the following scenario:PPPoE Sessions terminated on a 802.1q GEth Subinterface on a 7206 Router.It should be possible to put some customers (based on domain name) into a VRF (vrf-lite) instance.The vrf-id should provided by a Radi...