cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
609
Views
0
Helpful
1
Replies

887VA-W-E-K9 SSL VPN Feature Enable Problem

mark.riddle1
Level 1
Level 1

Hi

 

I've have a 887VA-W-E-K9. I have recently bought an SSL VPN license (10 user) but I can't get it to enable. Here is a a print of the sh ver:

 

Cisco C887VA-W-E-K9 (revision 1.0) with 363596K/29619K bytes of memory.
Processor board ID FCZ17069494
1 DSL controller
1 Ethernet interface
4 FastEthernet interfaces
1 Gigabit Ethernet interface
1 ATM interface
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Embedded AP (s)
DRAM configuration is 32 bits wide
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        C887VA-W-E-K9         FCZ17069494

 

License Information for 'c800'
    License Level: advsecurity   Type: Permanent
    Next reboot license Level: advsecurity


Configuration register is 0x2102

and sh license feature:

cisco887#sh license feature
Feature name             Enforcement  Evaluation  Subscription   Enabled  RightToUse
advipservices            yes          yes         no             no       yes
advsecurity              no           no          no             yes      no
ios-ips-update           yes          yes         yes            no       yes
SSL_VPN                  yes          yes         no             no       yes

 

and sh license all:

sh license all
License Store: Primary License Storage
StoreIndex: 0   Feature: advsecurity                       Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium
StoreIndex: 1   Feature: SSL_VPN                           Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: 10/0/0  (Active/In-use/Violation)
        License Priority: Medium
License Store: Built-In License Storage
StoreIndex: 0   Feature: advipservices                     Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: Non-Counted
        License Priority: None
StoreIndex: 1   Feature: ios-ips-update                    Version: 1.0
        License Type: EvalRightToUse
        License State: Not in Use, EULA not accepted
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: Non-Counted
        License Priority: None
StoreIndex: 2   Feature: SSL_VPN                           Version: 1.0
        License Type: EvalRightToUse
        License State: Inactive
            Evaluation total period: 8  weeks 4  days
            Evaluation period left: 8  weeks 4  days
            Period used: 0  minute  0  second
        License Count: 0/0  (In-use/Violation)
        License Priority: None

 

 

Are you able to help please?

 

Many thanks

 

Riddle

1 Reply 1

rvarelac
Level 7
Level 7

Hi Mark , 

 

In order to enable the license you need to use the following command.

 

License boot module <series> <license> 

Reference.

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/csa/command/csa-cr-book/csa-l1.html#GUID-8A39392B-D9D2-453D-805A-039DAD184C5A

 

Rate  if helps.

-Randy-