Hi all,
Trying to figure out why we are getting such abysmal file copy and iperf test speeds on our AnyConnect VPN and SD-Wan connections. I'm only getting around 3Mbps on a 1G/1G <->1G/1G connection. The charts show plenty of available bandwidth which makes sense. File speeds on the LAN are excellent, so it's not the file server. Tested MTU and all are set correctly. Speed tests indicate close to advertised speeds, so that all seems OK. Not sharing the WAN connection at spoke or hub with anything other than the MX-68 (spoke) and MX-95 (hub).
Any ideas where I could look or what I could do to find out what is causing the slowdown?
