10-01-2013 04:28 PM
I've been trying to setup an ACS48 Avocent/Cyclades console server on my home lab. I followed the manual as far as configuring the ACS48, but am not able to connect to any devices. I don't have the ADB0039 adapter, but did make an adapter using that pinout. I'm hoping for some assistance determining if the cable or ACS48 configs are incorrect.
If anyone is using the same console server, I'd greatly appreciate any tips on the setup as well as a confirmation that the ADB0039 adapter pinouts are correct.
thanks,
will
10-02-2013 07:32 PM
Nevermind. Got it.
Sent from Cisco Technical Support Android App
02-08-2014 07:18 PM
Hi
I have the ACS48 and am just starting my Cisco studies.
I have assembled several home routers and switches in two 12U desktop mini racks along with a rackmount Ubuntu PC
I was fortunate enough to grab my ACS48 off ebay new in the box for $65 and is has all the goodies with it.
I know little of Linux but have managed to get the ACS48 going and even update it's firmware to the latest code
I have my security model set to Open on the Cyclades and am trying to Telnet into it using PuTTY with the IP address and port but am not having any luck.
I have the Cyclades Cisco adapter plugged into the console port on a router and a straight thru short cat5 patch cable plugged into the adapter and then the serial port on the ACS48 I am trying to connect to via PuTTY
Anyone have experience with this?
Thanks
02-08-2014 08:03 PM
OK..... I found my own answers
1st: Indivual Ports must be enabled in the Cyclades Web Manager under the top PORTS tab and then the Physical ports selector. Don't forget to apply and save.
2nd: In PuTTY, the IP address of the terminal server is used of course but most important a 4 digit port number is used that starts with 70 and then the 2 digit port number from 01 to 48 or 7001 to 7048 as input into PuTTY.
That's it....
03-08-2021 11:32 PM
Hey,
I hope your doing well. I have an ACS5106 connected to a cisco 3560 via the ADB adapter. Any idea what commands I can use to enable the console server ports?
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide