06-06-2012 01:55 PM
I am attempting to install a 512 MB Cisco COmpact Flash for an ASA 5520. We have inserted the compact flash but when we do a DIR, it does not show. even as an unformatted device.
What do we need to do to make this a usable CF? Do I just need to reload the ASA or do I need to format the CF. It has been inserted into the slot in the back of the ASA 5520 and we have ensured that is had been seated properly.
Thank you
Dwane
Solved! Go to Solution.
06-06-2012 02:05 PM
From the Cisco FAQ article:
Can I hot-swap the flash drive? For example, is it possible to change the flash drive when Cisco ASA is powered ON and running?
It is always recommended that you turn off the Cisco ASA while you insert the flash drive. This disables all the running processes and allows the ASA to recognize the flash from the boot process.
06-06-2012 02:05 PM
From the Cisco FAQ article:
Can I hot-swap the flash drive? For example, is it possible to change the flash drive when Cisco ASA is powered ON and running?
It is always recommended that you turn off the Cisco ASA while you insert the flash drive. This disables all the running processes and allows the ASA to recognize the flash from the boot process.
06-06-2012 03:36 PM
I am attempting to install a 512 MB Cisco COmpact Flash for an ASA 5520. We have inserted the compact flash but when we do a DIR, it does not show. even as an unformatted device.
What brand is this CF?
If it ain't a Cisco-branded CF then this could be an issue because NOT ALL compact flash are supported.
If you need to format the CF then it has to be FAT16 standard or it won't work or you can use the ASA to format the CF.
06-07-2012 08:49 AM
It is a Cisco CF ordered from Cisco. ASA5500-CF-512MB=
06-07-2012 06:01 PM
Stick it into the ASA and format it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide