AnyConnect ISE Posture Module - Supress user prompts for remediation
We have a customer who want to use the AnyConnect vlient with the ISE Posture module for compliance reporting on an internal network.
We've installed AnyConnect Client 4.8.02042 Core & ISE Posture, successfully working with ISE to perform posture scans.
The issue is that this customer wants (at least initially) to report on compliance status without enforcing any remediation; where I'm stuck is finding a way to stop AnyConnect popping up an action window when a device fails a posture check.
Getting StartedPrerequisitesFinding your Orbital CloudUsing PythonGenerate your TokenConfirming your token is validCreating a QueryChecking a JobConclusion
You will need to make sure that you have Orbital access before we begin. You nee...
When I log into SecureX, I'm given an option to Sign in with MIcrosoft. What information is shared from my profile with Cisco?
1. If you signed in with your work email, the information shared from your profile is controlled by your or...
Stealthwatch Enterprise can be leveraged to monitor vulnerable devices, and alert on potential exploitation by bad actors looking to exploit Ripple20 and other potential vulnerabilities.
Note that the concepts and procedures outlined here can be used for...
The following is useful to those entities interested in monitoring appropriate usage of Cisco WebEx resources within their environments, as well as those interested in tracking additional metrics around usage of the WebEx service.
The relevant supporting...
I'm using AMP, and when I activated the SecureX Ribbon, I mistakenly used the wrong account to connect to SecureX. Now my SecureX Ribbon is connected to the wrong account. How do I fix it?
You can clear the SecureX Authorizatio...