10-23-2017 05:44 AM - edited 03-12-2019 04:39 AM
Hi,
I'm currently required your help regarding the cisco remote access solution.
My customer using at the moment the old solution Cisco VPN client, but he is migrating his computer to windows 10.
Cisco vpn client doesn't support windows 10.
He tries to download on cisco the last version remote user named : Cisco AnyConnect, without success, he is not allowed.
I think we need to install a licence named : ANY CONNECT Prenium Peers.
Could you please confirm my suspicions ?
Regards/Cordialement.
Julien
Solved! Go to Solution.
10-23-2017 06:01 AM
You would need to purchase the Anyconnect Plus or Apex license and link the contract to your CCO id to be able to download the Anyconnect software from the Cisco download page. Please refer to section 6.1 in the ordering guide below:
https://www.cisco.com/c/dam/en/us/products/collateral/security/anyconnect-og.pdf
In your case, I would assume the Anyconnect Plus license would suffice to have basic VPN connectivity to a headend like the ASA.
10-23-2017 06:01 AM
You would need to purchase the Anyconnect Plus or Apex license and link the contract to your CCO id to be able to download the Anyconnect software from the Cisco download page. Please refer to section 6.1 in the ordering guide below:
https://www.cisco.com/c/dam/en/us/products/collateral/security/anyconnect-og.pdf
In your case, I would assume the Anyconnect Plus license would suffice to have basic VPN connectivity to a headend like the ASA.
10-23-2017 06:17 AM
Thanks a lot for your quick answer !
I've a last question.
Before to buy and install this license, i want to confirm, if i can't see the licence its because the firewall has an old IOs version ?
Cisco asa 5510 :
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited
Maximum VLANs : 100
Inside Hosts : Unlimited
Failover : Active/Active
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 2
GTP/GPRS : Disabled
SSL VPN Peers : 2
Total VPN Peers : 250
Shared License : Disabled
AnyConnect for Mobile : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials : Disabled
Advanced Endpoint Assessment : Disabled
UC Phone Proxy Sessions : 2
Total UC Proxy Sessions : 2
Botnet Traffic Filter : Disabled
Because, for another customer, with the same model (Cisco ASA 5510) but more recent version i can see the licence (even if we have bought it).
Version :
Cisco Adaptive Security Appliance Software Version 8.4(7)30
Device Manager Version 7.5(1)
License :
Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 50 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 250 perpetual
Total VPN Peers : 250 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual
10-23-2017 06:25 AM
The ASA 5510 only has the 2 default SSLVPN licenses on it:
SSL VPN Peers : 2
This default license does not provide entitlement to download the Anyconnect 4.x versions from the Cisco download page. The Anyconnect Plus and Apex license will provide you an activation key that will increase the number from 2 to the 250.
The other customer has 50 Anyconnect Premium licenses:
AnyConnect Premium Peers : 50 perpetual
The name difference ("SSL VPN Peers" vs "Anyconnect Premium Peers") is because the second customer has a newer version. But they are essentially the same license. In short, Customer#1 does not have a license while Customer#2 has 50 Anyconnect licenses installed.
10-23-2017 06:26 AM
HI Rahul,
Thanks again for your quick answer. It was Really helpful !
10-23-2017 09:17 AM
Actually, it's not that easy with the licenses. The second customer has only AnyConnect 3 licenses, which also don't give acces to the actual AnyConnect 4 software. And AC3 is EOL and should ideally not be used any more as there won't be any more security fixes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide