We are using a Cisco Anyconnect SSL solution to remotly access our corporate network. We are using the DHCP servers of our company to deliver IP adresses to the remote users. They are Windows DHCP servers.
After some tests, we have noticed that the DHCP options configured in the Windows DHCP server scope were not transmitted to the remote user. We are able to receive an IP address and to connect to the Anyconnect SSL VPN but the options are not transmitted. When we look at the output of an "ipconfig /all" command, the options, such as the DNS server and the WINS server matches the values fixed in the Group Policy and the Connection Profil of the ASA Server but they do not match the value of the Windows DHCP server.
Is there a way to transmit those options to the remote user ? The options we want to transmit are :
- DNS suffix
- DNS Server IP address
- Default Gateway (Router in Windows)
Anytime, there are changes on the Windows DHCP or DNS servers, we want it to be changed exactly the same way for the remote users (not having to change the ASA configuration everytime).
For all versions of the Email Security Appliance (ESA) and Security Management Appliance (SMA), some Secure Sockets Link (SSL) certificates issued from the QuoVadis root certificate authority (CA) trust chain before 2021-03-31 cannot b...
Automation and programmability for networking and security are increasingly important topics. Every release since ISE 1.2 has included new REST API capabilities to better automate and integrate ISE with the rest of your network, appli...
The latest iteration (v2.3.4) of the Cisco Secure Firewall Migration Tool adds public beta support for S2S VPN migrations from ASA:
Policy-based (crypto map) Pre-Shared key authentication type VPN configuration to Firepower Management Center
Cisco Defense Orchestrator (CDO) is a cloud-based, multi-device manager that manages security products like Adaptive Security Appliance (ASA), Firepower Threat Defense next-generation firewall, and Meraki devices, to name a few.
We make improvement...
This document presents the ISE data limiting best practices that can dramatically improve the system performance on ISE.
Your deployment may be impacted if the alarms tab on ISE shows High load average, high CPU or high memoy usage alarm...