Hi All,
I configured anyconnect vpn. I can connect to it but cant ping internal network. Not sure what am missing here, any help is much appreciated.
* Configured no-nat rule (bi-directional) between the inside (192.168.40.0/24) and outside (10.10.50.0/24) network.
* Configured access rule (outside_in) allowing traffic from VPN subnet to inside network.
* enabled split tunnelling network. After connecting to VPN, i can see this inside subnet in split tunnel network. When i route print, i can see the below:
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.204.111 192.168.204.210 55
8.8.8.8 255.255.255.255 192.168.40.1 192.168.40.10 2
10.10.50.0 255.255.255.0 192.168.40.1 192.168.40.10 2
86.129.1.66 255.255.255.255 192.168.204.111 192.168.204.210 56
When i run ping to internal network, i cant see any hits in the access rule. When i trace route, its not going anywhere.
