02-22-2020 01:08 PM
Hello
I have SSL VPN tunnel enabled on my RV340 router and I can access it from remote.
But I can access only one IP address witch is router address and anything else.
Is it possible to configure VPN to use AnyConnect and have access to all hosts of remote lan?
Thanks in advance
L.
02-22-2020 02:22 PM
Yes, as long as you have added them to ACL to allow.
for reference :
02-22-2020 07:19 PM
03-03-2020 09:42 AM - edited 03-03-2020 10:49 AM
Hi
Can you show me an example for it? Is there something special for VPN or is that just a simple ACL rule?
When I allow WAN1 ip pool set in my SSL VPN configuratiion to VLAN1 it still doens't work.
Thanks in advance
LK
03-09-2020 04:57 AM - edited 03-09-2020 05:25 AM
Hello
My VLAN1 network is 192.168.100.0/24
My VPN network is 10.0.0.0/24
Any reference how to allow VPN network to access to VLAN1 via ACL?
Thanks in advance
L.
03-17-2020 12:40 PM
Can you provide solution how to?
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide