07-05-2005 03:39 AM
I am having as5300.In the flash: of it there are number of invalid checksum files.How to remove these files without erasing the entire flash.Following is text of show flash:
System flash directory:
File Length Name/status
1 373849 mica-modem-portware.2.5.1.0.bin
2 446464 mica-modem-pw.2.9.4.0.bin [invalid checksum]
3 446464 mica-modem-pw.2.9.4.0.bin [invalid checksum]
4 458752 mica-modem-pw.2.9.4.0.bin [invalid checksum]
5 454656 mica-modem-pw.2.9.4.0.bin [invalid checksum]
6 468529 mica-modem-pw.2.9.4.0.bin
7 450560 c5300-i-mz.120-7.T [invalid checksum]
8 458752 c5300-i-mz.120-7.T [invalid checksum]
9 458752 c5300-i-mz.120-7.T [invalid checksum]
10 4826368 c5300-i-mz.120-7.T
[8843792 bytes used, 7933424 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
Delete command removes only valid file in the flash:
Squeeze not supported on as5300
Regds,
prasanna
07-11-2005 06:16 AM
Check out the following steps :
Step 1 : Delete a file on a Flash device.
delete [[m/]device:]filename
Step 2 : If desired, permanently remove all deleted files on the Flash device (this operation can take a number of minutes to complete).
squeeze [m/]device:
Step 3 : Verify the files are deleted.
dir [[m/]device:][filename]
Else try the command - erase flash - for Erasing deleted and invalid files from flash
07-15-2005 04:11 AM
Dear b.hsu
When I am trying with /m it is not recognising the file at all as its a invalid checksum file.
routerI#delete m/
Delete filename [m/]? c5300-i-mz.120-7.T
Delete flash:c5300-i-mz.120-7.T? [confirm]
%Error deleting flash:c5300-i-mz.120-7.T (No such file or directory)
When I give erase flash: it is asking for erasing entire flash which I don't want.
Regds,
prasanna
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide