05-20-2005 01:07 PM
I must be missing something. I have an AS5350 with a T1 (not PRI) attached. The line rings, but the modems never pick up. I think I've configured the controller T1, group-async and modem lines properly, but obviously something is wrong. What have I left out?
Thanks
05-21-2005 10:47 AM
Hello,
can you post your configuration ?
You also might want to check this document:
Configuring an AS5350/AS5400 for Incoming Async and ISDN Calls
Regards,
GP
05-22-2005 06:32 AM
I may be able to post portions of the configuration, but I can't post everything. I have gone over that document several times. The problem with most of the online documentation is that it expects a PRI to be used, even for analog calls, when I have a T1. The T1 examples are mostly for voice only, not modem calls.
Let me know what you need to see I'll try to get permission to post it.
05-23-2005 11:29 AM
05-23-2005 10:24 PM
Your config looks all fine. Please capture the following debugs to further troubleshoot this problem:
debug modem
debug csm modem
debug ppp nego
Thanx and Regards,
~Zulfiqar
05-24-2005 05:26 AM
No output when trying to call in.
And we are sure we are calling into the right number because if we take the controller down, we get a busy.
Is there a different config for dialin?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide