Dear all,
i have upgraded a PIX 525 lately to a 5510 ASA, but i have faced a problem after this.
One of the DMZ's are connected to a switch that is not connected to my VTP domain on a DMZ port.
and iam natting one of the servers as below:
nat(DMZ) 1 x.x.x.x
global (outside) x.x.x.x
----------------------------------------
static (DMZ,outside) x.x.x.x x.x.x.x
with access-list to permit from host to host with all ports opened.
my problem is that the outside client is able to initiate a windows VPN to a server that i have in the DMZ, BUT it disconnects after almost 10minutes.
any ideas of what might be the reason of the disconnection.
Note, a cisco remote access VPN is also configured on the FW, and it doesnt disconnect.
thanx in advance.
