ASA - Anyconnect is not enabled afer reload.

[marionikic]

Hi,

everytime my ASA is reloaded anyconnect is not enabled.

It has to be manualy enabled.

I have asa 5510 with version 8.4.2.

[Florin Barhala · Accepted solution]

So you're saying that after you reload you have a different configuration then before?

Can you make a file compare of the configs before and after the reboot and see what line is missing if the case?

[marionikic]

Only thing I need to do is to check mark on "Enable CIsco Anyconnect VPN CLien access on the interfaces.."

It is always dissabled after reload.I susspect it's a bug.

[Florin Barhala]

It might be a bug, still I am curious about that configuration files diff.

CLI line should look like: anyconnect enable

[marionikic]

CLI looks like this:

ciscoasa5510# show running-config | beg anyconnect
 anyconnect-essentials
 anyconnect image disk0:/anyconnect-win-3.1.05160-k9.pkg 1
 anyconnect enable

System image file is "disk0:/asa842-k8.bin

I can not perfor restart.ASA is in production.