06-08-2016 12:34 PM
Hi Team,
We are trying to configure the ASA to send the Syslog messages to ManageEngine and from there we need to trigger a mail whenever the site to site VPN disconnects, Manage engine has requested the exact SYSLOG ID used for site to site VPN. Usually we have configure the same with the below commands,
logging enable
Logging Timestamp
Logging list VPN-LIST level debugging class vpn
Logging trap VPN-LIST
Kindly request your help to identify the exact Syslog ID details for the Site to Site VPN.
Thank you,
Vishnu
06-08-2016 04:53 PM
Hi Vishnu,
You can use these commands on your ASA to track VPN disconnections:
logging enable
logging list VPN message 713049
logging list VPN message 713050
logging list VPN message 113019
logging trap VPN
logging host [interface name] [Syslog’s IP]
Further please check this link for more clarity:
https://supportforums.cisco.com/discussion/11119801/monitoring-vpn-connection-attempts
Regards,
Aditya
Please rate helpful posts and mark correct answers.
06-08-2016 11:23 PM
Thanks Aditya,
Will test with the above Syslog ID's and will update you the status.
Thank you,
Vishnu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide