cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
0
Helpful
0
Replies

ASA to Sonicwall VPN with one side dynamic ip

masoodhussain1
Level 1
Level 1

Dear friends,

i am trying to configure site to site vpn between My Head Office and site office, in HO i have ASA 5510 with Cisco Adaptive Security Appliance Software Version 8.2(1) Device Manager Version 6.2(1) having static ip, on site office i have Sonicwall NSA 250 with dynamic ip and register name with dyndns,Somehow i am not able to establish VPN tunnel, between two sites, i am using ASDM for ASA.

Here is my Confusion,

On ASDM i am not able to see any option to use my dyndns name which i have registered, on sonicwall i have this option, but on ASA am not able to figure it out, i tried with dynamic ip assighn to sonicwall from ISP, but no success, from the log i can see that it is completing phase 1, but it is failling on phase 2, on ASA I am getting following error

Apr 09 18:49:02 [IKEv1]: IP = 2.50.130.236, Header invalid, missing SA p ayload! (next payload = 4)
[IKEv1]: IP = 2.50.130.236, Header invalid, missing SA p $

[IKEv1]: IP = 2.50.130.236, Header invalid, missing SA p aylo^ad! (next payload = 4)

ERROR: % Invalid input detected at '^' marker.
wbgasa# Apr 09 18:49:22 [IKEv1]: IP = 2.50.130.236, Header invalid, missing SA payload! (next payloa d = 4)
Apr 09 18:49:55 [IKEv1]: Group = 2.50.130.236, IP = 2.50.130.236, Can't find a valid tunnel group, aborting...!
Apr 09 18:49:55 [IKEv1]: Group = 2.50.130.236, IP = 2.50.130.236, Removing peer from peer table failed, no match!
Apr 09 18:49:55 [IKEv1]: Group = 2.50.130.236, IP = 2.50.130.236, Error: Unable to remove PeerTblEntry

need your help, will be very thankfull to you.

0 Replies 0