I have four asa 5516x with firepower Firewalls. Site a is our corporate location, Site b is our sales office location, and site C is our distrubtion location. I have at site A two ASA 5516x's ASA A and B. ASA B is mostly configured to handle our elan traffic and failover. ASA b is our site to site ASA. Site B connects to site A via a site to site tunnel via and ATT circuit site C is the same. Site A and Site B are working correctly and all site to site tunnels are working correctly. I have two VPN connections setup. At site a I have a splittunnel and it has no issues. When I vpn in I can access all networks within the company just fine. At site B I have a vpn tunnel and it is set to tunnel all. When I connect to the VPN at site b I can ping and SSH into all my equipment at site b and at site a but I can not reach site c or any other locations within my company. At site a for the vpn I have a standard ACL setup with all the networks that are allowed to pass over the VPN. At site B I do not have that as it is a tunnel all connection. My question is what do I need to do in order to get site A abd site be working so that Site b can access all of tehh networks within the company. attached configs
