08-02-2007 11:49 AM - edited 02-21-2020 03:11 PM
I am having a problem creating a tunnel between a ASA5520 running 7.2 are there any quirks or anything special about setting up the tunnel with the sonic device
08-08-2007 05:58 PM
This document demonstrates how to configure an IPsec tunnel with pre-shared keys to communicate between two private networks using both aggressive and main modes. In this example, the communicating networks are the 192.168.1.x private network inside the Cisco Security Appliance (PIX/ASA) and the 172.22.1.x private network inside the SonicwallTM TZ170 Firewall.http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008052c9d4.shtml
08-09-2007 03:30 AM
Thank you, I had looked over the web page you suggested. I have my ASA configured properply. I am looking find out if communicating with the sonicewall has any particular quirks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide