06-20-2016 05:01 PM
Hi ,
I have a question regarding VPN , is it possible to configure both VPN IPsec site-to-site and remote access vpn on the same ASA and working at the same time , does it need one or two different public ip address?
I have cisco ASA 5540 - version 9.1
Best Regards,
Solved! Go to Solution.
06-20-2016 09:09 PM
Hi
Yes you can with only 1 public ip. You'll need to activate the Same-security-traffic permit intra-interface feature to allow a vpn client to access the vpn site to site if you need it.
Take a look on the Cisco documentation ;
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/82020-addnetworkvpn.html#newra
Thanks
PS: Please don't forget to rate and mark as correct answer if this solved your issue
06-20-2016 09:09 PM
Hi
Yes you can with only 1 public ip. You'll need to activate the Same-security-traffic permit intra-interface feature to allow a vpn client to access the vpn site to site if you need it.
Take a look on the Cisco documentation ;
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/82020-addnetworkvpn.html#newra
Thanks
PS: Please don't forget to rate and mark as correct answer if this solved your issue
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: