Assign WebVPN user to particular group policy using Cisco ACS 5.x

[Mike Masalla]

Hi,

I was searching the net for configuration example or any user guide on assigning WevVPN user connecting to ASA-5500 Rel 8.2 to particular group policy using Cisco ACS 5.1, but what I got is pointing to Cisco ACS server prior to 5.x

If you are aware of the steps to follow or you know a url describe how to do it, please post it here

Thank you very much

Sami

[Jay Young]

Mike,

As you already know the Radius attribute 25 (group) is the one that will assign you to the ASA's group-policy and this will be need to set on the AAA server.  http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808cf897.shtml shows how to do it with ACS 4.x.  I know you wanted ACS 5.x so I would suggest that you move/forward this thread over to the AAA section within security where someone else might know the answer.  Unfortunately I am not familiar with ACS 5.x

-Jay