Authentication Proxy with RADIUS
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-29-2007 04:03 AM
Hi,
I have a problem with auth-proxy using RADIUS - authentication fails, although the Radius server (MS IAS) reports authentication success (I guess this is really an authorization issue):
I am using the config described in the attached file.
When I use local auth-proxy autorization it works fine.
When I use RADIUS I get an authentication failure on the Internet Explorer login page, but IAS reports success.
Also - in the existing setup I am not able to use RADIUS for VTY access - I get an %authorization failure% (not authentication).
I have attached the router debugs and the IAS server config.
If anyone has a suggestion I would really appreciate it.
Thanks,
Dragos
- Labels:
-
Remote Access
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-02-2007 09:10 AM
IAS server might be incorrect Radius Attribute to the router.ou can find an example of the RADIUS attributes required at the end of
'Configuring Authentication Proxy' at http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804ad9bc.html#wp1002138
