Azure Cisco ASA Setup for AnyConnect

[jason.verlinden]

Hi there,

I am trying to setup a virtual Cisco ASA on Microsoft Azure to use with an AnyConnect vpn connection. We simply need to ensure that we can make a vpn connection from and Android device and that is it. Don't need to access any resources behind on the virtual network or anything.

I have deployed the ASA on Azure but I am having trouble configuring it for my needs. I am a total newbie when it comes to this stuff. Is there a step by step guide to configure the ASA for this scenario. A lot of the things I see say to use the ASDM which we do not have access to and therefore must use CLI. I found the following resources:

http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/intro_start.html

http://www.cisco.com/c/en/us/td/docs/security/asa/asa95/configuration/vpn/asa-95-vpn-config/vpn-anyconnect.html

Is this what I would need to configure the ASA? If so, do I need to do everything in the first link? If anybody can point me to some ELI5 resources, that would be awesome.

Thanks!

[Rahul Govindan]

A better CLI guide for setting up Anyconnect may be found here: 

https://www.petenetlive.com/KB/Article/0000943

Be sure to change the image names to the new ones that you are using. 

[swilliamson]

Were you ever successful in deploying Virtual ASA in azure running Anyconnect?