Hi there, I am trying to setup a virtual Cisco ASA on Microsoft Azure to use with an AnyConnect vpn connection. We simply need to ensure that we can make a vpn connection from and Android device and that is it. Don't need to access any resources beh...
Forum Posts
Hi, when i go on ASDM Version: 7.2(2)1 ASA version: 9.2(2)4 to Monitoring>Vpn> sessions right click on a session then click ip address or details or any option. It starts parsing and displaying the latest Monitoring data... and get stuck at 97%. ...
Hi All, any recommendations welcome! I have Failover pair of 5520 in active/standby. Everything works fine on the active firewall but when it fails over to the standby Firewall one particular VPN stops working. the following error constantly appears ...
Resolved! VPN
Hi, I have a site-to-site vpn which is working fine but when i use the client vpn to connect to another network I am not able to connect to any machine on my site-to-site vpn. Thanks,
Hi, I tried mostly everything I found on this forum and others on the web but have not luck to the resolution of the issue. VPN client loses the internet connection as soon as SSL vpn connection starts (sing anyconnect). I think it has to do with th...
Hi, I have a question regarding routing when connected with Anyconnect. Consider below diagram. Static routes in ASA: route OUTSIDE 0.0.0.0 0.0.0.0 1.1.1.1 1route DMZ 10.0.224.0 255.255.255.0 10.0.200.2 1route INSIDE 0.0.0.0 0.0.0.0 10.0.10.2 tun...
Hello, We have a VPN connection between our HQ and one of our branches which has a Bintec router. Phase 1 and phase 2 are up, but no there is no traffic is being passed. This is the result of debug cry ipsec: HQ# debug crypto ipsec 255HQ# IPSEC: Re...
Hi Guys,. I have strange problem with VPN filter that I have on my L2L IPSect tunnel on ASA. access-list MY_VPN_Filter extended permit tcp host 20.183.75.152 eq 1414 host 16.19.56.60 access-list MY_VPN_Filter extended permit tcp host 20.183.75.15...
Hi All, I'm fairly new to Cisco ASA so please excuse my naivety. We have a Cisco 5555 ASA which is currently configured for AnyConnect VPN via AD. The next step is to authenticate users/laptops with AD + Certificates. I have configured the ASA as a...
Hello guys, I have Cisco firewall ASA 5505 (CLI:ASA Version 8.2(2); ASDM version: 6.2(5)). We had configure VPN (site to site) toward the customs agency. They sent me private LAN and settings we to configure in ours firewall. The problem is: when we...
Hello! We are preparing to implement a new DMVPN/PfR WAN for a customer, in preparation for their roll-out of VoIP. For the best VoIP support, of course we would prefer to allow voice traffic to flow directly spoke-to-spoke. However, the custom...
I'm working on a VPN site-to-site solution with VLAN on each site. Physical ports are manually configured for matching user role to VLANs. I would like that users stay dynamically in their own VLAN wherever they are connected from (internal or extern...
We want to create site to site VPN with one of our partner, our current setup is as below. We have three ISPs terminated on A10 load balanacer ----> Router---->ASA firewall Could any one help...
Hi All, We have two sites i.e. Primary and DR for SSL VPN. We are using Cisco Anyconnect client for SSL VPN. On desktop or laptop machine the Anyconnect client software gives the prompt to reconnect to the VPN in case of primary site goes down. Bu...
Resolved! ASA 5505's Site to Site dropped packets
Hello all. I have a few issues I am trying to resolve that I have been working on for a few days. Quick intro to my environment. Site A ASA 5505 > Microwave Shot > ISP 200ms / 2 Workstations on LAN Site B ASA 5505 > vSat > ISP 800ms / Catalyst 1...
