10-30-2014 02:48 AM
Hello All,
I have 6 Mbps link. I need to setup 2 Mbps for one S2S vpn and 4 Mbps for another S2S vpn. I know site2site vpn configuration but don't know the setting bandwidth limit. Can anyone let me know how to do or any link.
Thanks,
Krishna
10-30-2014 07:16 AM
Hi Krishna,
Do you known how to setup a VTI vpn?
http://www.cisco.com/en/US/technologies/tk583/tk372/technologies_white_paper0900aecd8029d629_ps6635_Products_White_Paper.html
Then you can implement QoS (shaping or policing) on that tunnels interfaces.
Here an example for shaping (configure on both sides):
policy-map T1
class class-default
shape average 3984588 39845 // 3984588 = 4*1024*1024*.95 for 4 Mbps link
interface tunnel 1
service-policy output T1
Hope this can help!
Regards,
Pedro Lereno
10-31-2014 02:17 AM
Hi Pedro,
Thank you for the reply. I have seen the link you have provided and it is like gre over ipsec but no crypto maps. I have learned new topic today. The document is good and thanks again.
Regards,
Krishna
10-31-2014 03:18 AM
Check out this link....is this what you are after?
http://www.cisco.com/c/en/us/td/docs/ios/12_2/qos/configuration/guide/fqos_c/qcfvpn.html
--
Please remember to select a correct answer and rate helpful posts
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: