BGP peering over ipsec Tunnel query

[mvsheik123]

Hi all,

Testing with BGP peering over IPsec tunnel with ASA new code.

L3 switch with basic BGP config -> ASA1 (code 8.2) <--L2L tunnel-->ASA2 (code 9.2.x) with BGP config.

Trying to form BGP peering L3 switch IP and ASA2 LAN IP (with pvt AS#). I can ping IPs across the tunnel.

Also, both ASAs outside IPs allowed in 'crypto ACL' (host ip <->host IP). BGP state on both end showing 'Active'.

Debug from L3 switch end logging 'no response' from other end. Any suggestions?

Thanks in advance,

MS

[Jon Marshall]

You have probably sorted this by now but few things -

1) is the L3 switch IP being translated or not ?

2) are you using authentication for the BGP session (if so try it without just to test).

3) do you have ebgp multihop configured

Jon