Can I connect to the firewall after Any connect VPN is established?

[onfedor1981]

Can I connect to the firewall after AnyConnect VPN is established?
192.168.0.1 - inside interface on Firewall
192.168.0.2 - server in private network
After establishing a vpn connection, I can ping 192.168.0.2. I can
connect to 192.168.0.2, but i can't ping 192.168.0.1.
The connection from 192.168.0.2 server to firewall 192.168.0.1 can be established.

 

[Rob Ingram]

Hi @onfedor1981 

You need to configure the CLI command management-access <interface name> where <interface name> is usually the name of inside interface. This will allow you to connect to the inside interface using SSH, HTTP or ping, when connected to a VPN tunnel.

https://www.cisco.com/c/en/us/support/docs/security/adaptive-security-device-manager/118092-configure-asa-00.html

[onfedor1981]

Thank you very much. But in my case firewall is not ASA , but Cisco Firepower 1010 Threat Defense 6.4.0-102.

[Sheraz.Salim]

Are you manage your FTD from FMC if so here a document. but if this is something you not after and if you still manage your FTD from FMC than you can you the option flexconfig and push the policy for anyconnect.