06-19-2012 01:07 PM
Even after specifying "split-tunnel-policy tunnelspecified" with "split-tunnel-network-list value SPLIT-TUNNEL" and denying all traffic to/from the public IP of the ASA, I'm still not able to SSH into the firewall. Everything else appears to be working OK, but I need to be able to manage the ASA from the public interface. Actually, I kind of expect this given the say an sa is setup for the tunnel, and it would seem that a deny statement would be ignored, but maybe there is a way around this. Thank you.
Solved! Go to Solution.
06-19-2012 11:06 PM
If you want to connect to your inside IP through the tunnel, you need to specify "management access inside":
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_management.html#wp1064497
regards, Karsten
Sent from Cisco Technical Support iPad App
06-19-2012 11:06 PM
If you want to connect to your inside IP through the tunnel, you need to specify "management access inside":
http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/access_management.html#wp1064497
regards, Karsten
Sent from Cisco Technical Support iPad App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide