05-28-2010 06:44 PM
hello
while trying to boot up Cisco VPN 5002, the system comes up to this point -
Initializing free memory...
+ SDRAM mem: base 0x20ae6c78, len 257004424
+ CPU mem: base 0x0000a920, len 1005280
+ Pkt mem: base 0x58000000, len 2097152
Created 128 packet buffers
PCI BIOS: Start initialization
PCI BIOS: Identify devices ...
Device: bus-00 slot-01 fct-00 : "21143 Ethernet"
Device: bus-00 slot-02 fct-00 : "21152 PCI-PCI Bridge"
Device: bus-01 slot-01 fct-00 : "Compress/EnCrypt Device"
Device: bus-01 slot-02 fct-00 : "Compress/EnCrypt Device"
Device: bus-01 slot-03 fct-00 : "VPN Key Coprocessor"
PCI BIOS: Map devices ...
PCI BIOS: End initialization
Ethernet 0: 10/100 card in slot 1
Multislot Initialization...
+ Card in slot #1 in 2 slot chassis. Acting as I/O Processor.
+ Initializing fiber channel
+ Finding Route Processor... |
_______________________________________________
attemping to turn the dial to any potsion will not do much,
my goal is to reset the password and bring the system to basic confugraion
Thank you for your help
05-28-2010 07:00 PM
Are you studying or this VPN5002 is your production device?
VPN5000 series concentrator has been EOL for a long time as per the following EOL notice:
05-28-2010 08:17 PM
Hello
Thank for your reply,
Here is the message that I get when trying to access the link you have posted..
The file or application you are trying to access may require additional entitlement or you are trying to access a file with an invalid name. Additional entitlement levels are granted based on a users relationship with Cisco on a per-application basis.
I have the system itself ( pre - owned ), and I need to do some work on it..
I am aware it's EOL, but I'm positive that there some people out there that knoe a thing or two about it
I have some documentation about the product, but also have a slight suspicion that the product might have a hardware malfunction (or not) .
any advice will be more the appreciated ,
Thank you
05-29-2010 12:12 AM
Based on the booting up sequence, if it is stuck at the last sequence that you have posted, it might seem to look like a hardware issue.
I've attached the PDF of the EOL notice for your reference. It's been EOLed since August 27, 2007, so RMA is not even possible.
Maybe someone else has similar issue before.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide