change timeout for VPN clients logon

[d.thelen]

Hello.

I have got an request from a customer. In this scenario 3.6.4 Cisco VPN-Clients are connecting to a c1710 router running the new 12.2(15)T and using the XAuth authentication. When the userlogon appears, the user just have 30 seconds to key in the password and press OK. Because of a long cryptical password, the 30 seconds are not enough to key in all charracters of the password and the router disconnect due to a timeout with the message "Remote peer terminated connection". The customer asks now if it is possible to change this timeout to a longer time.

Thank you very much in advance for your help.

Best regards

Dirk Thelen

[afakhan]

Hi,

crypto isakmp xauth timeout <5-60 seconds>

you can use it to change timeout.

Thx

Afaq

[d.thelen]

Hello.

Thanks a lot! The customer will it appreciate.

Regards

Dirk