Changed Outside Interface

[jasonm]

I have a cisco ASA5520 that I move the outside interface from Interface0/3 to interface0/1. I removed the config on interface03 and set up the same info on interface 0/1 now I can not VPN in to the ASA the only config chages I made were to the interfaces nothing more. I have ping the outside interfaces just fine but cant VPN in to the device at all. Any one ever have this same problem is it a code bug I dont understand why I can't change outside interfaces on the ASA should work fine.

[Muhammad Thanveer]

Hello Friend,

Most probably you also must change the configs in VPN

crypto isakmp enable( interface) I mean this should be interface 0/1

ssl trust-point ASDM_TrustPoint2 interface 0/1

enable (outside interface you have chosen)

crypto isakmp enable (outside interface you have chosen)

crypto isakmp enable (outside interface you have chosen)

These are all expected areas to be changed. All the very best.

Please do not forget to rate the helpful posts.

Regards
Thanveer
"Everybody is genius. But if you judge a fish by its ability to climb a tree, it will live its whole life believing that it is a stupid."