Solved: Cisco 2960 AAA authentication

jm.virtual01 · ‎10-19-2017

I am using Cisco 2960 switch. For the authentication, i am using AAA authentication with RADIUS server. Currently, i am using a default profile credential to access the switch but i want to configure the switch in such a way so user can access the switch with their own network credentials.

on the RADIUS server, the profile is there for the users but i don't know how it only accept the default profile.

Do any one has any suggestion ?

Flavio Miranda · ‎10-20-2017

Hello @jm.virtual01

First of all. Does your RADIUS server is integrated to your Domain Controller.

If does, then you need to create a profile and map it to your user groups on your domain.

How to do this specifically may vary from RADIUS to RADIUS but this is the button line.

-If I helped you somehow, please, rate it as useful.-

View solution in original post

Flavio Miranda · ‎10-20-2017

Hello @jm.virtual01

First of all. Does your RADIUS server is integrated to your Domain Controller.

If does, then you need to create a profile and map it to your user groups on your domain.

How to do this specifically may vary from RADIUS to RADIUS but this is the button line.

-If I helped you somehow, please, rate it as useful.-