Cisco 6880 VSS

[jm.virtual01]

I have configured stack of 4 switch. There is FEX configured and 4 slots now i have removed one switch from the stack physically and want to remove it's configuration from the switch.

FEX configuration is as follow,

module provision fex 115
slot 1 slot-type 401 port-type 61 number 29 virtual-slot 12
slot 2 slot-type 401 port-type 61 number 29 virtual-slot 13
slot 3 slot-type 401 port-type 61 number 29 virtual-slot 18
slot 4 slot-type 401 port-type 61 number 29 virtual-slot 20
!
i want to remove the slot 4. It is not connected at this moment.

Does anyone has any suggestion ? I don't want to reload the switch.

[Leo Laohoo]

no slot 4 slot-type 401 port-type 61 number 29 virtual-slot 20

[jm.virtual01]

Does it require reload the switch ?

[Leo Laohoo]

Nope.

[jm.virtual01]

"no slot 4 slot-type 401 port-type 61 number 29 virtual-slot 20"

Command doesn't work to remove the slot.

Whenever i tried with this command, it doesn't allow me to use this command.

Here is the process that i did to use this no slot command,

Switch # conf t

Switch(config) # fex 115

Switch(config) # no ?

                       description FEX description
                       location Interface location information
                       module FEX module
                       mtu Configure FEX system mtu size
                        type FEX type

it shows me only options that allow.

Now i am confused.

Can you tell me what's going wrong with this ?