04-30-2002 06:54 AM - edited 02-21-2020 11:43 AM
Hello,
I am trying to setup a vpn between two 827's on an adsl line (3 later), I have
done vpn's on Netscreen's, but I am a bit lost with the Cisco(I know basic cisco stuff
show run / Conf t /Interfaces config)
Could somebody point me too some good doc?
Would the "easy vpn setup" be any use to me?
Thanks very much
James
04-30-2002 08:49 AM
Take a look at IPSec topics in http://www.cisco.com/warp/public/707/index.shtml
Probably you are going to find there an environment close to yours.
You can try http://www.cisco.com/warp/public/707/index.shtml, too.
It's related to a 2600 router, but you can make some little changes to fit an 827
Good luck!
04-30-2002 06:31 PM
You really want to do a lan to lan tunnel between the two routers, so the sample config below might help"
http://www.cisco.com/warp/customer/471/vpn_pppoe.html
It is between an 827 and a 2600, but the config for the other 827 would be similar to the first one anyway.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide