cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
958
Views
0
Helpful
5
Replies

Cisco Anyconnect and local network.

hack3rcon
Level 1
Level 1

Hello,

When I'm using Cisco Anyconnect for access to a VPN server, then I can't access to local network and local printers that connected to network by NIC.

I selected "Enable local LAN access" option too, but problem not solved.

How can I solve it?

 

Thank you.

5 Replies 5

Hi,

You will need to also configure split tunnelling on the ASA, example:-

 

access-list ALL_EXCEPT permit host 0.0.0.0
group-policy GP-1 attributes
split-tunnel-policy excludespecified
split-tunnel-network-list value ALL_EXCEPT

Refer to this post for more information

 

HTH

I should configure it on VPN server? 

Hello.

 

Yes, you should configure this parameter (split exclude or split include) on the device that you are using anyconnect- ASA, Firepower, etc

 

http://blog.soundtraining.net/2013/03/how-to-configure-split-tunneling-on.html

 

https://integratingit.wordpress.com/2019/03/16/asa-split-tunnelling/

hack3rcon
Level 1
Level 1

As you see, We defined the Route as below:

photo5994411028563211256.jpg

All local network ranges defined.

What is the problem?

 

Thank you.

hack3rcon
Level 1
Level 1

What is my problem?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: