03-17-2020 09:34 AM
Goodevening,
I have recently installed Cisco anyconnect (VPN) to connect to my work.
Altho as soon as i hit the Connect button my ethernet on my windows completely shutsdown. I cant do anything with it anymore. It still says connected.
I am not a specialist in this so i need help. If any 1 of you guys can help me get this working i would be greatfull. Just tell me what you need and ill see what i can post to help.
03-18-2020 07:32 AM
Hi,
Is the VPN session established over another medium, like WiFi or 4/5G? Did you also install the NAM module of AnyConnect? If so, NAM, by default, allows one single link on the device to be active, for security purposes. The easy way to fix this is to uninstall the NAM module. If you need the NAM module, but still want to fix the problem, go to your Ethernet NIC settings and uncheck the "Cisco AnyConnect Network Access Manager Filter Driver". By disabling this, you'll make the NAM module not be aware of that NIC, so you'll never be able to use NAM for 802.1x for that NIC.
Regards,
Cristian Matei.
03-31-2020 09:26 AM
Hi, when you say the ethernet shuts down, how do you mean?
Do you have access to services at work, but no access to devices on your local network?
If so, it sounds like 'local LAN access' haven't been configured on the firewall which you're connecting to.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide