03-28-2017 10:32 AM - edited 02-21-2020 09:12 PM
Hello, we're running Cisco Anyconnect 4.2 NAC to connect to our VPN. I'm running into an issue where it's telling me that there are no network adapters. I've tried uninstalling/re-installing the network adapter drivers, Cisco NAC and I just can't get them to show up. Any ideas?
03-28-2017 12:35 PM
Try uninstalling anything that inserts a network shim first, such as other VPN clients, antivirus software, third party firewalls, etc.
03-28-2017 03:14 PM
The "No network adapters" is shown for the NAM portion of Anyconnect. This is not used for VPN but for Wired and Wireless connections. By default it does not manage Wireless connections, so if you are connected to Wireless, it wont show up. Your VPN tab seems to be showing up connections according to your picture.
05-12-2020 06:00 AM
? We are seeing this as well, what in the config file for NAM should set the wireless adapter. It seems after some reboots, the CA doesn't see the wireless adapter as it whould, NO VPN is used
04-17-2024 03:37 AM
Had this on a few machines,
A few reboots resolved, another time uninstalling the NIC and reboot to reinstall, resolved it
Also found on another occasion the NIC was disabled and re-enable the NIC resolved it
04-25-2024 01:02 AM
Do we have any permanent fix instead of rebooting the system all time?
04-25-2024 01:07 AM
I would stop any troubleshooting and first update the client. Version 4.2 is EOL, completely outdated and also has security vulnerabilities.
04-25-2024 10:06 AM
If you right click the client in the task bar there is a repair function
08-07-2024 11:38 PM
Is there any permanent solution for frequent "No adapter available" issue? Even we followed all the troubleshooting which is not permanent. Its happening frequent for multiple users.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide