We have moved portions of our machines to CSC 5.1.5.65 which is the last update needed in order for auto-updates to work. The issue I am experiencing is that when CSC updates it pops up a notification window that does not go away until it finishes d...
Hi,I would like to block some specific AD service account coming for anyconnect vpn .please help/assist is there any option to do this in ASA side , not by blocking with ip , by blocking with user.
Hello all,We have a link, https://remote.ourdomain.tld which is currently getting hammered by login attempts. Since our VPN uses AD, the failed logins are causing AD account lockouts.We are on Cisco FMC 7.4.2 and the FTD units themselves (FP2140's) ...
Objective: Use ASA to support native VPN client for RA on current versions of Android, Windows 10/11 (and possibly others) using supported types such as IKEv2/IPSec+EAP/MSCHAPv2 for authentication.An ASA (ASA5516/9.12) is currently used for IKEv1/LT2...
Is there a way to configure SecureClient to ignore IPv6 addresses? I can see in logs that WiFi adaptors are self issuing FE80 IPv6 addresses, we use DNS servers for TND so this then fails and the client attempts to connect when on site.I can see the ...
I'm just looking for a bit of information, I did try searching so please accept my apologies if this has been posted before BUT, could someone give me an explanation of the 3 items below, and what they do exactly? Also is there a way to see the disa...
%ASA-1-106021: Deny UDP reverse path check from 172.19.60.219 to 172.19.60.255 on interface outsideI have seen this syslog messages, when i connect with vpnclient.172.19.60.0/24 is my inside.How can i solve that issue,casco
After installing the secure client I get this error message. It works well on different machines. I can't find any logs that could give me more details about the error.I'm using Debian 12 and the version 5.1.6-103.
Hi,Are there any guides or advise on interperting / reading the crrect DART log to diagniose a user Secure Client connection issue. I'm struggling to pinpoint the cause for a single user.The client connects fine, but experiences regular disconnects, ...
I can get a Meraki MX to successfully Connect to Cisco IOS-XE (C8200-1N-4T), However, when I advertise multiple subnets on the Meraki side, the Cisco side will only add one subnet via one SA (and a random one at that - but possibly the highest number...
Hi Folks, I am trying to establish routing between two Site to Site vpn tunnels, both of which are terminating on the same outside interface of my Cisco ASA. Please find attached Network Diagram for the same. All Firewalls used are Cisco AS...
Hi Everyone,I am configuring AnyConnect VPN and getting a strange error am not able to identify the root cause and resolution.In AnyConnect Client Profile > When I click on edit, it gives below error:Error: Input is not a well-formed, schema-complain...
I have site to site VPN created between two FTDs and each FTD has multiple internal interfaces and private subnets configured. All subnets are configured on the VPN and all endpoints can talk to each other. However, I cannot get traffic across the VP...
Hello,I installed Cisco several times on my Mac but nothing works. Can someone help me?Cisco 4.9.04043macOS Bis Sur Version 11.7.10 Thanks
Hello Together,first happy new year to all!I hope I can explain my question right. We have four offices with FTD and one Azure Gateway. On Azure we have our DHCP Server.With One FTD no Problem. Build Route Based VTI Tunnel interface -> use BGP -> eve...
