Cisco ASA 5505 AnyConnect VPN

[goboston20]

I have a ASA 5505(with VPN client configured on primary ISP) and I configured the primary ISP for anyconnect. ASA is on active/standby mode. Both vpn client/anyconnect are working fine on the active interface. I configured the AnyConnect for the standy interface, but I cannot https to it nor ping it(icmp enabled on the interface). Is it possible that I cannot ping nor https to it since it's on standby mode? If I want to make it live, would I have to disconnect the primary interface first? Thanks!

[Markus Thun]

I think if the ASA in standby you cannot open the http site because the ASA is on standby. Disconnect or shutdown the active ASA and try again.

[paolo bevilacqua]

Wrong forum, post in "Security - VPn". You can move your posting with the Actions panel on the right.