02-23-2017 03:06 PM
Hi,
under my ASA in
Each time I try to connect with VPN client, after entering the
Any input? Thank you.
02-23-2017 05:44 PM
You can't stop the username/password prompt. You could just create a dummy user that everyone uses.
02-23-2017 11:43 PM
Hello,
I am not sure if this helps, but if you don't want your AnyConnect users (assuming that AnyConnect is what your VPN clients are using) to be prompted, you might consider configuring SBL (Start Before Logon)...
http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#ID-1428-000000d7
02-26-2017 11:12 AM
SBL does not remove the username/password prompt.
I guess the only way to remove it would be to go to a full certificate deployment. This is definitely not something you would want to do if the effort to creating a user account is already too much.
02-28-2017 04:28 PM
I found a config from a friend that helped with the setup, it no longer asks for a username and password. Not sure exactly which command field but I'm
group-policy name internal
group-policy name attributes
dns-server value 192.168.10.2
dhcp-network-scope 172.25.25.0
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value name_splitTunnelAcl
default-domain value name.local
tunnel-group name type remote-access
tunnel-group name general-attributes
default-group-policy name
dhcp-server 192.168.10.2
tunnel-group name ipsec-attributes
pre-shared-key fkjfh89ue
isakmp ikev1-user-authentication none
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide