Cisco IOS SSL VPN on mobile

[anwesh1711]

Hi there,

I want to know can we use the Cisco IOS SSL VPN on mobile using Anyconnect client. If yes what is the pre-requisites, is there any kind of additional license require.

Thanks

[Marius Gunnerud · Accepted solution]

From the following article:

http://www.cisco.com/c/en/us/support/docs/security/anyconnect-vpn-client/107391-anyconnect-faqs.html#Licnsng

 

Q. Is it possible to connect the iPad, iPod, or iPhone AnyConnect VPN Client to a Cisco IOS router?

A. No. It is not possible to connect the iPad, iPod, or iPhone AnyConnect VPN Client to a Cisco IOS router. AnyConnect on iPad/iPhone can connect only to an ASA that runs version 8.0(3).1 or later. Cisco IOS is not supported by the AnyConnect VPN Client for Apple iOS. For more information, refer to the Security Appliances and Software Supported section of the Release Notes for Cisco AnyConnect Secure Mobility Client 2.4, Apple iOS 4.2 and 4.3.

--

Please remember to rate and select a correct answer

[anwesh1711]

Hi,

Thanks for the quick response.

The link " Security Appliances and Software Supported" is not opening.

Thanks

[Marius Gunnerud]

Might be that the link is either broken or perhaps the document has been moved. but in any case iPad, iPhone, etc is only supported on the ASA as of now. -- Please remember to rate and select a correct answer

[Marius Gunnerud]

Check out this link.  It is the datasheet for AnyConnect mobility client.  Under the guidlines and limitations section the first point states that it is not supported on IOS.  Just incase you need a document to show as proof :-)

http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/rn-ac3-0-iOS.html#pgfId-1141074

--

Please remember to rate and select a correct answer