Cisco Meraki MX Appliances site to site VPN uning DDNS service

[Manojy]

Dear Community,

Greetings!!

I am considering replacing our Cisco ASA with a Cisco Meraki MX. Currently, we have 21 sites with Cisco routers, site to site with ASA at the head office using Dynamic IP (DDNS).All site to HO VPN IPSEC working fine.

If I replace the MX 105 and set it up with DDNS at HO, will it work using IKEv2 IPsec with only dynamic IPs?

Head office with the Cisco Meraki MX 105 and the remote site with a Cisco router do not have static IPs, only dynamic ip.Routing

Please advise.

Regards

Manoj

[Aref Alsouqi · Accepted solution]

Yes it should be supported as per this guide:

Site-to-Site VPN Settings - Cisco Meraki Documentation

[Manojy]

Dear Aref,

Thankyou, much appreciated.

Regards

Manoj