Cisco VPN Client 4.02 and PIX 6.3(3)

[adul]

I config vpn at PIX 525 version 6.3(3) for client remote to inside network. When I used dial-up via ISP and estabilsh VPN with Cisco VPN Client 4.02, it's work. I can used resource inside network. But when I established VPN connection from Coporate LAN such as CISCO Thailand or My Company. I can't established VPN tunnel. But I can ping interface outside's PIX. How I slove this problem. My company used NAT and Cisco Thailand ( I don't know)

[mostiguy]

enable isakmp nat-traversal to allow the vpn client to encapsulate packets in udp to work behind nat

[adul]

you mean that i must enable at my router's office or PIX's customer ?

[mostiguy]

on the pix. it will allow vpn connections to it from behind routers doing NAT/PAT

[adul]

Thank you very much