Cisco VPN client behind a Symantec Gateway security

[viviantanyy]

I have configured my Cisco VPN client behind a Symantec Gateway Security to connect to a Cisco PIX 515E. The VPN client is able to login to the PIX but I cannot access to any of the applications.

Kindly advise what I should do.

Thank you

[spremkumar]

hi

can u check up whether you have permitted esp and isakmp protocols in ur SGS which is very much required for to have IPSEC connection established and to have proper data transfer ?

Find the port and other details reqd to be opened in ur SGS

IKE uses UDP port 500.

IPSec ESP and AH protocols use protocol numbers 50 and 51.

regds

[jackko]

udp 4500 may also be required.

[viviantanyy]

Hi,

I have permitted the following port in the SGS

50

51

4500

500

But I still could not access my applications.

Kindly advise what could be the problem

Thank you

[jackko]

we need to identify whether the issue is with the pix or the sgs.

to identify, try connect vpn using the same pc via a dialup connection. if you can access the app, then the issue is with the sgs and vice versa.